#include <SnowpackInterface.h>

Public Member Functions
	SnowpackInterface (const mio::Config &io_cfg, const size_t &nbworkers, const mio::DEMObject &dem_in, const mio::Grid2DObject &landuse_in, const std::vector< mio::Coords > &vec_pts, const mio::Date &startTime, const std::string &grids_requirements, const bool is_restart_in)
	Constructs and initialise Snowpack Interface Master. He creates the Worker and Distributes the Data from the other modules to the Worker. Is the acces interface A3D side. More...

	SnowpackInterface (const SnowpackInterface &)

	~SnowpackInterface ()
	Destructor of SnowpackInterface Master. Handels special cases with POP-C++ and also free correctly runoff and workers. More...

SnowpackInterface &	operator= (const SnowpackInterface &)
	Assignement operator, required because of pointer member. More...

double	getTiming () const
	get time who was used to exchange Data with Workers and run on each Pixel the Snowpack Model throught workers. More...

void	writeOutput (const mio::Date &julian)
	Internal in Snowpack Interface Master used method to write standard results in output files. Attantion: to have old format files output, set in ini file following key: A3D_VIEW = true More...

void	writeOutputSNO (const mio::Date &julian)
	commands worker to write .sno files. Is triggered by Alpine Control More...

void	setSnowDrift (SnowDriftA3D &drift)
	Set reference to SnowDrift module, to comunicate with it. More...

void	setEnergyBalance (EnergyBalance &myeb)
	Set reference to EnergyBalance module, to comunicate with it. More...

void	setDataAssimilation (DataAssimilation &init_da)
	Set reference to DataAssimilation module, to comunicate with it. More...

void	setRunoff (Runoff &init_runoff)

void	assimilate (const mio::Grid2DObject &daData, const mio::Date &timestamp)
	Interface that DataAssimilation can push the data to the SnowpackInterface This is currently never used... More...

void	setSnowMassChange (const mio::Grid2DObject &new_mns, const mio::Date &timestamp)
	Interface that SnowDrift can push the data to the SnowpackInterface. More...

void	setMeteo (const mio::Grid2DObject &new_psum, const mio::Grid2DObject &new_psum_ph, const mio::Grid2DObject &new_vw, const mio::Grid2DObject &new_dw, const mio::Grid2DObject &new_rh, const mio::Grid2DObject &new_ta, const mio::Date &timestamp)
	get Meteo changes from AlpineControl or SnowDrift module More...

void	setRadiationComponents (const mio::Array2D< double > &shortw, const mio::Array2D< double > &longwave, const mio::Array2D< double > &diff, const double &solarElevation, const mio::Date &timestamp)
	get values from Energy Balance More...

mio::Grid2DObject	getGrid (const SnGrids::Parameters &param) const
	Request specific grid by parameter type. More...

Constructor & Destructor Documentation

◆ SnowpackInterface() [1/2]

SnowpackInterface::SnowpackInterface	(	const mio::Config &	io_cfg,
		const size_t &	nbworkers,
		const mio::DEMObject &	dem_in,
		const mio::Grid2DObject &	landuse_in,
		const std::vector< mio::Coords > &	vec_pts,
		const mio::Date &	startTime,
		const std::string &	grids_requirements,
		const bool	is_restart_in
	)

Constructs and initialise Snowpack Interface Master. He creates the Worker and Distributes the Data from the other modules to the Worker. Is the acces interface A3D side.

Parameters

io_cfg	is used to init Runoff and to create IOManager, which is used to write the standart output
nbworkers	gives the new values for the wind speed
dem_in	gives the demographic Data. Also tetermines size and position of the geographical modeling scope
landuse_in	gives the landuse Data. Also tetermines size and position of the landuse for modeling scope
vec_pts	gives the spezial points. For this points more output is done then for the others. Calcualtion is the same.
startTime	is the time and date the first simulation step is done
grids_requirements	list of grids that must be prepared for other modules (similar to the Output::GRIDS_PARAMETERS configuration key)
is_restart_in	is used to know which files the worker needs to read to init the pixel

◆ SnowpackInterface() [2/2]

SnowpackInterface::SnowpackInterface ( const SnowpackInterface & )

◆ ~SnowpackInterface()

SnowpackInterface::~SnowpackInterface ( )

Destructor of SnowpackInterface Master. Handels special cases with POP-C++ and also free correctly runoff and workers.

Member Function Documentation

◆ assimilate()

void SnowpackInterface::assimilate	(	const mio::Grid2DObject &	daData,
		const mio::Date &	timestamp
	)

Interface that DataAssimilation can push the data to the SnowpackInterface This is currently never used...

Parameters

daData	are the data from the DataAssimilation module
timestamp	for controlle if data from DataAssimilation are form the correct simulation step

◆ getGrid()

mio::Grid2DObject SnowpackInterface::getGrid ( const SnGrids::Parameters & param ) const

Request specific grid by parameter type.

Parameters

param parameter

Returns: 2D output grid (empty if the requested parameter was not available)

◆ getTiming()

double SnowpackInterface::getTiming ( ) const

get time who was used to exchange Data with Workers and run on each Pixel the Snowpack Model throught workers.

◆ operator=()

SnowpackInterface & SnowpackInterface::operator= ( const SnowpackInterface & source )

Assignement operator, required because of pointer member.

◆ setDataAssimilation()

void SnowpackInterface::setDataAssimilation ( DataAssimilation & init_da )

Set reference to DataAssimilation module, to comunicate with it.

Parameters

init_da is the reference to the DataAssimilation module

◆ setEnergyBalance()

void SnowpackInterface::setEnergyBalance ( EnergyBalance & myeb )

Set reference to EnergyBalance module, to comunicate with it.

Parameters

myeb	is the reference to the EnergyBalance module

◆ setMeteo()

void SnowpackInterface::setMeteo	(	const mio::Grid2DObject &	new_psum,
		const mio::Grid2DObject &	new_psum_ph,
		const mio::Grid2DObject &	new_vw,
		const mio::Grid2DObject &	new_dw,
		const mio::Grid2DObject &	new_rh,
		const mio::Grid2DObject &	new_ta,
		const mio::Date &	timestamp
	)

get Meteo changes from AlpineControl or SnowDrift module

Parameters

new_psum	gives the new values for new Water High
new_psum_ph	gives the new values for the precipitation phase
new_vw	gives the new values for the wind speed
new_dw	gives the new values for the wind direction
new_rh	gives the new values for the realtiv Humidity
new_ta	gives the new values for the Aire temperature
timestamp	is the time of the calculation step from which this new values are comming

◆ setRadiationComponents()

void SnowpackInterface::setRadiationComponents	(	const mio::Array2D< double > &	shortwave_in,
		const mio::Array2D< double > &	longwave_in,
		const mio::Array2D< double > &	diff_in,
		const double &	solarElevation_in,
		const mio::Date &	timestamp
	)

get values from Energy Balance

Parameters

shortwave_in	is the 2D double Array map of ISWR [W m-2]
longwave_in	is the 2D double Array map of ILWR [W m-2]
diff_in	is the 2D double Array map of Diffuse radiation from the sky [W m-2]
solarElevation_in	double of Solar elevation to be used for Canopy (in dec)
timestamp	is the time of the calculation step from which this new values are comming

◆ setRunoff()

void SnowpackInterface::setRunoff ( Runoff & init_runoff )

◆ setSnowDrift()

void SnowpackInterface::setSnowDrift ( SnowDriftA3D & mydrift )

Set reference to SnowDrift module, to comunicate with it.

Parameters

mydrift is the reference to the SnowDrift module

◆ setSnowMassChange()

void SnowpackInterface::setSnowMassChange	(	const mio::Grid2DObject &	new_mns,
		const mio::Date &	timestamp
	)

Interface that SnowDrift can push the data to the SnowpackInterface.

Parameters

new_mns	are the data about the new Snow masses from the DataAssimilation module
timestamp	for controlle if data from DataAssimilation are form the correct simulation step

◆ writeOutput()

void SnowpackInterface::writeOutput ( const mio::Date & date )

Internal in Snowpack Interface Master used method to write standard results in output files. Attantion: to have old format files output, set in ini file following key: A3D_VIEW = true

Parameters

date	is the date for which the output is done

◆ writeOutputSNO()

void SnowpackInterface::writeOutputSNO ( const mio::Date & date )

commands worker to write .sno files. Is triggered by Alpine Control

Hack –> Find better software architecture to do this then SnowpackInterface also does output for other modules of A3D here..

Parameters

date	is the date witch the output is done

The documentation for this class was generated from the following files:

Public Member Functions

Constructor & Destructor Documentation

◆ SnowpackInterface() [1/2]

◆ SnowpackInterface() [2/2]

◆ ~SnowpackInterface()

Member Function Documentation

◆ assimilate()

◆ getGrid()

◆ getTiming()

◆ operator=()

◆ setDataAssimilation()

◆ setEnergyBalance()

◆ setMeteo()

◆ setRadiationComponents()

◆ setRunoff()

◆ setSnowDrift()

◆ setSnowMassChange()

◆ writeOutput()

◆ writeOutputSNO()